Supported Peripherals
BME280
BME280 metadata and support evidence published by Flash.
bundled.2026.09.03.1The catalog API is not configured for this build. Showing the last known-good snapshot shipped with this web build.
- Catalog
- catalogued
- Datasheet
- none
- Knowledge
- none
- Driver
- none
- HIL
- none
These badges are the support baseline common to the whole family. Variant-only artifacts are reported separately below.
Identity and selection
| Field | Published value |
|---|---|
| Stable catalog ID | peripheral:bosch:bme280 |
| Revision | 1 |
| Manufacturer | Bosch Sensortec |
| Category | Environmental sensors |
| Interfaces | i2c, spi |
| Orderable parts | BME280 |
| Aliases | BME 280 |
Projects store the stable family ID and requested release. Orderable MPNs remain variants of that family, so package or purchasing aliases do not duplicate the family record. A variant may still publish a more specific datasheet or knowledge pack.
Family support baseline
| Dimension | Release value |
|---|---|
| Catalog | catalogued |
| Datasheet | none |
| Knowledge pack | none |
| Reference driver | none |
| Hardware-in-the-loop | none |
Published artifacts
No downloadable artifacts are attached to this release entry.
Orderable parts
| MPN | Package | Lifecycle | Variant artifacts |
|---|---|---|---|
| BME280 | LGA-8 | active | Uses family defaults |
When a project selects an exact MPN, its primary datasheet and knowledge pack override the corresponding family defaults. Other variant documents are added to the family documents and deduplicated by document ID. Selecting the family without a part uses only the family defaults.
Provenance
| Field | Value |
|---|---|
| Catalog release | bundled.2026.09.03.1 |
| Release timestamp | 2026-09-03T00:00:00.000Z |
| Source | Flash maintained hardware catalog |
| Source ID | source:flash:maintained-catalog |
| Source license policy | repository_policy |
| Source observed | 2026-09-03T00:00:00.000Z |
Add it to a project
Open the Flash peripheral picker and select this stable catalog entry. For parts absent from the official release, use the custom peripheral flow and attach the documentation you are authorized to use. See Add a peripheral.